cancelar
Mostrando resultados para 
Pesquisar então 
Você quer dizer: 
  • ×
    Informação
    Windows 11

    Saiba como atualizar para o Windows 11 usando o Windows Update, confira aqui

    Encontre perguntas e respostas comuns aqui.

    Informação
    Corrija erros no Windows 10

    Resolva os problemas de atualização do Windows 10 em um PC HP – Centro de suporte HP para Windows 10

  • post a message
  • ×
    Informação
    Windows 11

    Saiba como atualizar para o Windows 11 usando o Windows Update, confira aqui

    Encontre perguntas e respostas comuns aqui.

    Informação
    Corrija erros no Windows 10

    Resolva os problemas de atualização do Windows 10 em um PC HP – Centro de suporte HP para Windows 10

  • post a message
Aprendiz
Aprendiz
12 10 3 2
Mensagem 1 de 5
3.035 Exibições
Reportar Mensagem

Solucionado!

Smart Array P410i não Sobe

Olá  Pessoal

Tenho um Sever ML 350 G6  com uma controlador Smart Array P410i , porem ela nao esta mais aparecendo nao consigo verificar os raid e o SO nao sobe mais, pelo SmartStart  ele exibe o seguinte erro para efetuar um update :

 

ACU Version 8.70.9.0
Diagnostic Module Version 5.2.64.0
INFOMGR Version 6.0-1.0
Time Generated Wednesday May 14, 2014 6:47:29PM

Device Summary:
Smart Array P410i in Embedded Slot

Consolidated Error Report:
Controller: Smart Array P410i in Embedded Slot
Message: Controller State: A logical drive was configured with a newer version of the Array Configuration tools than is currently running. Please obtain a newer version of the Array Configuration tools to configure or diagnose this controller.

Report for Smart Array P410i in Embedded Slot
---------------------------------------------

Smart Array P410i in Embedded Slot : Device Error Report

Device Severity Error
---------------------------------- -------- ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Smart Array P410i in Embedded Slot Critical Controller State: A logical drive was configured with a newer version of the Array Configuration tools than is currently running. Please obtain a newer version of the Array Configuration tools to configure or diagnose this controller.


Smart Array P410i in Embedded Slot : Identify Controller

Configured Logical Drives 3 (0x03)
Configuration Signature 0xae928cd9
RAM Firmware Revision 5.06
ROM Firmware Revision 5.06
Hardware Revision 0x02
Boot Block Revision 2.31
Drive Present Map 0x00000000
External Drive Map 0x00000000
Board ID 0x3245103c
Swapped Cable Flags 0x00
Non Disk Map 0x00000000
Bad Host RAM Addr 0x00
CPU Revision 0x48
PDPI Revision 0x00
EPIC Revision 0x01
WCXC Revision 0x00
Marketing Revision C
Controller Flags 0x8c
Position Controller Flag Status
-------- ---------------------------------------------------------------------------------------------------------------------------------------------------- -------------
2 Firmware has been upgraded to support capacity expansion operations that require more than 65535 sectors (32MB) to be relocated per expand iteration Informational
3 Firmware supports 15 drives per SCSI bus Informational
7 Firmware supports the new big drive assignment maps (128 bits) as well as the big physical drive numbering (0x80+) Informational

Host Flags 0x02
Expand Disable Code 0x01
Position Expand Disable Code Status
-------- ------------------- -------------
0 Expand Not Needed Informational

Protocol Chip Count 0x01
Maximum Blocks 65535 (0x0000ffff)
Controller Clock 0x00012f00
Drives Per Bus 0 (0x00)
Big Drive Present Map 0x03 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Position Status
-------- -------------
0 Informational
1 Informational

Big External Drive Map All Zeroes (16 x [0x00])
Big Non Disk Map All Zeroes (16 x [0x00])
Task Flags 0x0100
Busses For ICL 0 (0x00)
Supported Controller Modes 0x00
Current Controller Mode Not Redundant (0x00)
Controller Status 0x00
Position Controller Status Status
-------- ----------------- -------------
0 Location External Informational

Redundant Failure Reason 0x00
Unsupported NILE Busses 0x00
Host I2C Autorev 0x00
CPLD Revision 0x0f
Fibre Chip Count 0 (0x00)
Daughterboard Type 0x00
More Swapped Cable Flags 0x00
License Key Status 0x08
Position License Key Status Status
-------- --------------------------- -------------
3 License Keys Supported True Informational
2 No Keys Stored Informational

Access Module Status 0x07
ADG Support 0x40
Features Supported 0x55 0x1c 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
ROM Inactive Revision 5.06
Active ROM Status 0x00
PPC to PCI Bridge Status 0x00
Redundant Server Info 0x00000000
Percent Write Cache 0% (0x00)
Cache Size In MB 256 MB (0x0100)
Cache Battery Count 0 (0x00)
Total Controller Memory Size 0x0100
More Controller Flags 0xf8
Position Controller Flag Status
-------- ----------------------------------------------------------------------------------- -------------
3 Firmware supports deferred code load drive firmware updates Informational
4 Firmware supports basic splitting and resyncing of mirrored volumes Informational
5 Controller implements SAS changes documented in the firmware spec Informational
6 Controller supports variable-length extended physical drive map and drive numbering Informational
7 Firmware supports greater than 2TB logical volumes Informational

XBoard Host I2C Autorev 0x00
Battery PIC Revision 0xff
DDFF Version 0202
Maximum Logical Devices Supported 64 (0x0040)
Extended Logical Unit Count 3 (0x0003)
Maximum Physical Devices Supported 255 (0x00ff)
Maximum Physical Drives Per Logical Unit 128 (0x0080)
Enclosure Count 2 (0x02)
Expander Count 0 (0x00)
Offset To Extended Drive Present Map 276 (0x0114)
Offset To Extended External Drive Map 308 (0x0134)
Offset To Extended Non Disk Map 340 (0x0154)
Internal Port Status 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
External Port Status 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Yet More Controller Flags 0xfa71a216
Position Controller Flag Status
-------- -------------------------------------------- -------------
1 This is a SAS controller that supports OBDR Informational
2 Reorder logical drive operation is supported Informational
4 Multiple Parity Groups Supported Informational
9 Ncq Supported Informational
13 PHY-to-PHY map is supported Informational
15 Sat Pass Through Read Supported Informational
16 Sat Pass Through Write Supported Informational
20 Fixed Fields Length Supported Informational
22 Sense Expansion Ability Supported Informational

Last Lockup 0x00
PCI Slot 0 (0x00)
Firmware Build Number 0x0000
Maximum Safe Full Stripe Size MB 6 MB (0x00000006)
Total Structure Length 404 (0x00000194)
Vendor ID HP
Product ID P410i
Extended Last Lockup 0x00000000
Maximum RAID01 Stripe Size 0xffff
Maximum RAID45 Stripe Size 0x0400
Maximum RAID6 Stripe Size 0x0200
Yet More Swapped Cable Flags 0x0000
Maximum Device Paths 0x04
Offset To Zoned In Drive Map 0 (0x0000)
Fixed Structure Length 276 (0x00000114)
Firmware Compile Time Stamp Jun 15 2011 14:47:22
Even More Controller Flags 0x00001210
Extended Drive Present Map 0x03 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Position Status
-------- -------------
0 Informational
1 Informational

Extended External Drive Map All Zeroes (32 x [0x00])
Extended Non Disk Map 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x0c
Position Device Status
-------- ----------------------- -------------
250 SEP (PMCSIERA SRC 8x6G) Informational
251 Informational


Smart Array P410i in Embedded Slot : Cache Config Status

Cache Disabled Map 0x00000000
Read Cache Size 144 MB (0x0090)
Write Cache Size 0 MB (0x0000)
Disable Flag Enabled (0x00)
Offset To Extended Cache Disabled Map 256 (0x0100)
Offset To Extended Cache Failure Map 264 (0x0108)
Offset To Extended Read Cache Disabled Map 0 (0x0000)
Cache Configuration Flags 0x00
Total Structure Length 280 (0x00000118)
Maximum Logical Devices Supported 64 (0x0040)
Offset To Extended Write Cache Disabled Map 0 (0x0000)
Fixed Structure Length 256 (0x00000100)
Cache Flags 0x00000201
Position Cache Flag Status
-------- ----------------------------------------------------- -------------
0 Configured And Enabled For At Least One Logical Drive Informational
9 Max Dirty Cache Lines Not Flushed Reached Warning

1 SOLUÇÃO ACEITA

Soluções aceitas
Aprendiz
Autor
Aprendiz
12 10 3 2
Mensagem 5 de 5
Reportar Mensagem

Solucionado!

Smart Array P410i não Sobe

Olá  os HDs  acendem os LEDs, entrei em contato com o suporte e eles me passaram um link para baixar uma atualizacao :  

 

HP_Service_Pack_for_Proliant_SPP2014020B.2014_0421.2_780345_001_spp_2014.02.0B-SPP2014020B.2014_0421.2

 

Link  http://h17007.www1.hp.com/us/en/enterprise/servers/products/service_pack/spp/index.aspx

 

Depois da atualizacao ele funcionou .

 

Obrigado a todos

Exibir solução no post original

Essa resposta foi útil? Sim Não
4 RESPOSTAS 4
Professor Regente Professor Regente
Professor Regente
3,479 2,592 521 1,657
Mensagem 2 de 5
Reportar Mensagem

Solucionado!

Smart Array P410i não Sobe

Everton_NetWork 

 

Bom dia

 

Se voce instalou o SO Win e atualizou o SPP.

Acesse o ACU pelo SO.

 

Iniciar->HP SYstem tools-> Array configuration Utiliy 

 

Aparece a mesma coisa ?

 

 

 

Sou um funcionário da Hewlett-Packard Enterprise e Se a resposta foi útil e/ou você gostaria de dizer "obrigado",
clique no botão “ Sim ” Eu ajudei a resolver o problema?

Não esqueça clique “Aceitar como uma solução”, se alguém tiver a mesma pergunta, esta solução pode ser útil 😉

Essa resposta foi útil? Sim Não
Aprendiz
Autor
Aprendiz
12 10 3 2
Mensagem 3 de 5
Reportar Mensagem

Solucionado!

Smart Array P410i não Sobe

Olá ,  o SO  nao esta subindo .

Essa resposta foi útil? Sim Não
Professor Regente Professor Regente
Professor Regente
3,479 2,592 521 1,657
Mensagem 4 de 5
Reportar Mensagem

Solucionado!

Smart Array P410i não Sobe

Everton_NetWork 

 

Boa tarde.

 

Segue o link da explicação da mensagem informada.

 

Title: HP ProLiant ML/DL/BL Servers - ADU/ACU Report Error: Logical drive was configured with newer version of Array Configuration tools than is currently running

 

 

http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/mostViewedDisplay?javax.portlet....

 

 

Quando o equipamento liga normal no post aparece alguma mensagem de erro ?

 

Tinha Raid criado,  qual o nivel ?(0,1,5)

 

Fisicamente nos HDS acende algum LED ?

 

 

Sou um funcionário da Hewlett-Packard Enterprise e Se a resposta foi útil e/ou você gostaria de dizer "obrigado",
clique no botão “ Sim ” Eu ajudei a resolver o problema?

Não esqueça clique “Aceitar como uma solução”, se alguém tiver a mesma pergunta, esta solução pode ser útil 😉

Essa resposta foi útil? Sim Não
Aprendiz
Autor
Aprendiz
12 10 3 2
Mensagem 5 de 5
Reportar Mensagem

Solucionado!

Smart Array P410i não Sobe

Olá  os HDs  acendem os LEDs, entrei em contato com o suporte e eles me passaram um link para baixar uma atualizacao :  

 

HP_Service_Pack_for_Proliant_SPP2014020B.2014_0421.2_780345_001_spp_2014.02.0B-SPP2014020B.2014_0421.2

 

Link  http://h17007.www1.hp.com/us/en/enterprise/servers/products/service_pack/spp/index.aspx

 

Depois da atualizacao ele funcionou .

 

Obrigado a todos

Essa resposta foi útil? Sim Não
† As opiniões expressas acima são de responsabilidade exclusiva de seus autores, e não da HP. Utilizar este site significa aceitar os termos de uso e as Regras de Participação