Trocar a HD em RAID - HP PROLIANT DL 380 G6

[dcr]

Boa tarde!

Tenho um HP DL 380 G6 onde foi configurado 2 HD's em RAID 1. Uma das HD's deram problema e será substituida.

Minha duvida é em relação a substituição.... é só colocar a HD nova e reiniciar o servidor? Ou preciso entrar no gerenciador da controladora e fazer algum procedimento?

Obrigada!!

Daniela

[f_silva]

Ola, boa noite.

Como os HDs neste server são hotplug, basta trocar o HD e monitorar o rebuild através do software da controladora (Array Configuration Utility ou Smart Storage Administrator). Se vc não tiver segue link para download:

Para todas as versões de Windows x64

http://ftp.hp.com/pub/softlib2/software1/sc-windows/p1308213277/v87168/cp020336.exe

Para todas as versões de Windows x86 (32 Bit)

http://ftp.hp.com/pub/softlib2/software1/sc-windows/p640080033/v80009/cp018120.exe

Não é preciso reiniciar o servidor para iniciar o rebuild este processo é automatizado na controladora, quando isso estiver ocorrendo os 2 HDs ficarm com os leds piscando.

Segue combinações:

SAS/SATA hard drive LED combinations:Online/activity LED (green)Fault/UID LED (amber/blue)Interpretation

On, off, or flashing	Alternating amber and blue	The drive has failed, or a predictive failure alert has been received for this drive; it also has been selected by a management application.
On, off, or flashing	Steadily blue	The drive is operating normally, and it has been selected by a management application.
On	Amber, flashing regularly (1 Hz)	A predictive failure alert has been received for this drive. Replace the drive as soon as possible.
On	Off	The drive is online, but it is not active currently.
Flashing regularly (1 Hz)	Amber, flashing regularly (1 Hz)	Do not remove the drive. Removing a drive may terminate the current operation and cause data loss. The drive is part of an array that is undergoing capacity expansion or stripe migration, but a predictive failure alert has been received for this drive. To minimize the risk of data loss, do not replace the drive until the expansion or migration is complete.
Flashing regularly (1 Hz)	Off	Do not remove the drive. Removing a drive may terminate the current operation and cause data loss. The drive is rebuilding, erasing, or it is part of an array that is undergoing capacity expansion or stripe migration.
Flashing irregularly	Amber, flashing regularly (1 Hz)	The drive is active, but a predictive failure alert has been received for this drive. Replace the drive as soon as possible.
Flashing irregularly	Off	The drive is active, and it is operating normally.
Off	Steadily amber	A critical fault condition has been identified for this drive, and the controller has placed it offline. Replace the drive as soon as possible.
Off	Amber, flashing regularly (1 Hz)	A predictive failure alert has been received for this drive. Replace the drive as soon as possible.
Off	Off	The drive is offline, a spare, or not configured as part of an array.

Qualquer duvida nos procure e caso ficou tudo OK com as dicas que passei por favor marque este post como solucionado para ajudar nossos futuros colegas.

Obrigado.