cancelar
Mostrando resultados para 
Pesquisar então 
Você quer dizer: 
  • ×
    Informação
    Corrija erros no Windows 10

    Resolva os problemas de atualização do Windows 10 em um PC HP – Clique aqui

  • post a message
  • ×
    Informação
    Corrija erros no Windows 10

    Resolva os problemas de atualização do Windows 10 em um PC HP – Clique aqui

  • post a message
Nota para problemas comuns em Desktops
Se você está com problemas em seu TECLADO OU MOUSE SEM FIO, confira o tópico: Solucionar problemas com teclado / mouse sem fio.
Highlighted
Estudante
Estudante
Mensagem 1 de 2
635Exibições
Reportar Mensagem

Solucionado!

Como Resetar power-on senha

EliteDesk 800 g1 sff
Microsoft Windows 7 (64-bit)

Não consigo resetar a senha do power-on, alguém pode me ajudar??

1 SOLUÇÃO ACEITA

Soluções aceitas
Highlighted
Professor Regente
Professor Regente
Mensagem 2 de 2
Reportar Mensagem

Solucionado!

Como Resetar power-on senha

Olá amigo, boa tarde

 

Os procedimento estão no manual do equipamento:

http://h20628.www2.hp.com/km-ext/kmcsdirect/emr_na-c04331008-1.pdf

 

capitulo 11 pagina 250

Password security and resetting CMOS

 

To disable the power-on or setup password features, or to clear the power-on or setup passwords,complete the following steps:
1. Shut down the operating system properly, then turn off the computer and any external devices, and disconnect the power cord from the power outlet.
2. With the power cord disconnected, press the power button again to drain the system of any residual power.
WARNING! To reduce the risk of personal injury from electrical shock and/or hot surfaces, be sure to disconnect the power cord from the wall outlet, and allow the internal system components to cool before touching.
CAUTION: When the computer is plugged in, the power supply always has voltage applied to the system board even when the unit is turned off. Failure to disconnect the power cord can result in damage to the system. Static electricity can damage the electronic components of the computer or optional equipment. Before beginning these procedures, ensure that you are discharged of static electricity by briefly touching a grounded metal object. See the Safety & Regulatory Information guide for more information.
3. Remove the access panel.
4. Locate the header and jumper.
NOTE: The password jumper is green so that it can be easily identified. For assistance locating the password jumper and other system board components, see the Illustrated Parts & Service Map (IPSM). The IPSM can be downloaded from http://www.hp.com/support.
5. Remove the jumper from pins 1 and 2.
6. Place the jumper on either pin 1 or 2, but not both, so that it does not get lost.
7. Replace the access panel and reconnect the external equipment.
8. Plug in the computer and turn on power. Allow the operating system to start. This clears the current passwords and disables the password features.
9. Shut down the computer, unplug the power, and disconnect the external equipment.

10. Remove the access panel.

11. Place the jumper on pins 1 and 2.

12. Replace the access panel.

13. Reconnect the external equipment and plug in the computer

 

Capture.JPG

 

Se esta resposta foi útil e te ajudou a resolver o problema, por favor, clique no botão assim poderá ajudar outros usuários. E clique no botão para agradecer a ajuda.

Exibir solução no post original

1 RESPONDER 1
Highlighted
Professor Regente
Professor Regente
Mensagem 2 de 2
Reportar Mensagem

Solucionado!

Como Resetar power-on senha

Olá amigo, boa tarde

 

Os procedimento estão no manual do equipamento:

http://h20628.www2.hp.com/km-ext/kmcsdirect/emr_na-c04331008-1.pdf

 

capitulo 11 pagina 250

Password security and resetting CMOS

 

To disable the power-on or setup password features, or to clear the power-on or setup passwords,complete the following steps:
1. Shut down the operating system properly, then turn off the computer and any external devices, and disconnect the power cord from the power outlet.
2. With the power cord disconnected, press the power button again to drain the system of any residual power.
WARNING! To reduce the risk of personal injury from electrical shock and/or hot surfaces, be sure to disconnect the power cord from the wall outlet, and allow the internal system components to cool before touching.
CAUTION: When the computer is plugged in, the power supply always has voltage applied to the system board even when the unit is turned off. Failure to disconnect the power cord can result in damage to the system. Static electricity can damage the electronic components of the computer or optional equipment. Before beginning these procedures, ensure that you are discharged of static electricity by briefly touching a grounded metal object. See the Safety & Regulatory Information guide for more information.
3. Remove the access panel.
4. Locate the header and jumper.
NOTE: The password jumper is green so that it can be easily identified. For assistance locating the password jumper and other system board components, see the Illustrated Parts & Service Map (IPSM). The IPSM can be downloaded from http://www.hp.com/support.
5. Remove the jumper from pins 1 and 2.
6. Place the jumper on either pin 1 or 2, but not both, so that it does not get lost.
7. Replace the access panel and reconnect the external equipment.
8. Plug in the computer and turn on power. Allow the operating system to start. This clears the current passwords and disables the password features.
9. Shut down the computer, unplug the power, and disconnect the external equipment.

10. Remove the access panel.

11. Place the jumper on pins 1 and 2.

12. Replace the access panel.

13. Reconnect the external equipment and plug in the computer

 

Capture.JPG

 

Se esta resposta foi útil e te ajudou a resolver o problema, por favor, clique no botão assim poderá ajudar outros usuários. E clique no botão para agradecer a ajuda.

Exibir solução no post original

Nota para problemas comuns em Desktops
Se você está com problemas em seu TECLADO OU MOUSE SEM FIO, confira o tópico: Solucionar problemas com teclado / mouse sem fio.
† As opiniões expressas acima são de responsabilidade exclusiva de seus autores, e não da HP. Utilizar este site significa aceitar os termos de uso e as Regras de Participação