BrunoIpexy, boa tarde !
As fontes que foram testadas e suportadas são essas especificações:
ower Specifications
350 Watts Non-Hot Plug, Non redundant Power Supply | Part Number | 629015-001 | Operational Input Voltage Range (Vrms) | 100 to 127 and 200 to 240 V auto ranging | Frequency Range (Nominal) (Hz) | 50 to 60 Hz | Nominal Input Voltage (Vrms) | 100 | 120 | 200 | 230 | 240 | Max Rated Output Wattage Rating | 350 | 350 | 350 | 350 | 350 | Nominal Input Current (A rms) | 5 | 5 | 2.5 | 2 | 2 | Max Rated Input Wattage Rating (Watts) | 486 | 476 | 466 | 460 | 460 | Max. Rated VA (Volt-Amp) | 491 | 281 | 480 | 475 | 475 | Efficiency (%) | 72 | 73.5 | 75 | 76 | 76 | Power Factor | 0.99 | 0.99 | 0.97 | 0.97 | 0.97 | Leakage Current (mA) | 0.45 | 0.45 | 0.45 | 0.45 | 0.45 | Maximum Inrush Current (A peak) | N/A | No component was damaged and input fuse shall not blow | N/A | No component was damaged and input fuse shall not blow | N/A | Maximum Inrush Current duration (mS) | N/A | N/A | N/A | N/A | N/A |
|
|
460 Watts Hot Plug, redundant Power Supply | Part Number | 499249-001 | Operational Input Voltage Range (Vrms) | 100 to 127 and 200 to 240 V auto ranging | Frequency Range (Nominal) (Hz) | 50 to 60 Hz | Nominal Input Voltage (Vrms) | 100 | 120 | 200 | 230 | 240 | Max Rated Output Wattage Rating | 460 | 460 | 460 | 460 | 460 | Nominal Input Current (A rms) | 5.5 | 54.5 | 2.6 | 2.3 | 2.2 | Max Rated Input Wattage Rating (Watts) | 526 | 520 | 505 | 503 | 503 | Max. Rated VA (Volt-Amp) | 548 | 542 | 527 | 524 | 524 | Efficiency (%) | 87.5 | 88.5 | 91 | 91.5 | 91.5 | Power Factor | 0.97 | 0.97 | 0.97 | 0.97 | 0.97 | Leakage Current (mA) | 0.42 | 0.5 | 0.83 | 0.96 | 1 | Maximum Inrush Current (A peak) | 30 | 30 | 30 | 30 | 30 | Maximum Inrush Current duration (mS) | 20 | 20 | 20 | 20 | 20 |
|
https://www.harddrivesdirect.com/quickspecs_proliant_ML110G7.php
Quanto aos beeps, Segue o HP Proliant Servers Troubleshooting Guide, onde mostram o significado dos erros pelo beep e codigos na tela quando aparecem
http://h20564.www2.hpe.com/hpsc/doc/public/display?docId=c00300504
Sou um funcionário da Hewlett-Packard Enterprise e Se a resposta foi útil e/ou você gostaria de dizer "obrigado",
clique no botão “ Sim ” Eu ajudei a resolver o problema?
Não esqueça clique “Aceitar como uma solução”, se alguém tiver a mesma pergunta, esta solução pode ser útil
😉