Formatar NAND Flash Intelligent Provisioning HP ML310G8

[danilodbr]

Ola, 

Poderiam me ajudar sobre uma formatacao da nand do servidor HP 310G8. 

Estou usando esse tutorial, mas est[a dando errado. 

NAND Format Method 4: Windows PowerShell (Remote Format)

1. Download and install "Scripting Tools for PowerShell: iLO cmdlets" (v1.5.0.1 or prior), which is available from these links:
   
   NOTE: "Scripting Tools for PowerShell: iLO cmdlets" versions v2.x and v1.x can both be installed on a server at the same time; version v2.x does not include the "Invoke-HPiLORIBCLCommand", so version v1.x must be installed and used in order to provide this capability.
   
   Scripting Tools for Windows PowerShell (x64): iLO cmdlets
   Version: 1.5.0.1(9 Mar 2018)
   File name: HPiLOCmdlets-x64.exe (1.1 MB)
   

   https://support.hpe.com/hpsc/swd/public/detail?sp4ts.oid=1008862655&swItemId=MTX_2eda1acc832d48ad944...

   
   
   Scripting Tools for Windows PowerShell (x86): iLO cmdlets
   Version: 1.5.0.1 (9 Mar 2018)
   File name: HPiLOCmdlets-x86.exe (1.1 MB)
   

   https://support.hpe.com/hpsc/swd/public/detail?swItemId=MTX_dd9188b9396745ce901012120b

   
   
   NOTE: The PowerShell commands below assume the Force_Format.xml file (described in the prerequisites section above) is in the C:\RIBCL_XML\ folder and named Force_Format.xml.
2. Open a PowerShell Command line and enter the following commands (italicized). The iLO IP, username, and password need to be included in the second command.
   
   PS C:\>$xml = ([string](get-content "C:\RIBCL_XML\Force_Format.xml"))
   
   PS C:\>Invoke-HPiLORIBCLCommand -server iLOIP -Username Administrator -Password password -RIBCLCommand $xml -DisableCertificateAuthentication
3. A status similar to the following will be displayed if the commands are accepted:

[FabioC]

danilodbr  Boa tarde !

Se voce tiver com a firmware da ILO atualizada 2.70 voce consegue fazer somente clicando na opção 

Segue o documento que mostra a tela

https://support.hpe.com/hpsc/doc/public/display?docId=a00048622en_us

[danilodbr]

Minha firmware não está "degrada" porém eu não consigo acessar as configurações ex: RAID e etc. 

Veja as imagens.

[FabioC]

Consegue acessar o o Intelligent Provisioning  (f10) no boot ?

Se conseguir vai em -> performance maintenance -> Smart Storage administrator

Se não conseguir atualiza ele seguindo a documentação para versão 1.71

Link para dowload:>

https://support.hpe.com/hpsc/swd/public/detail?swItemId=MTX_a2b2caf8066e4a8b82a966d628

Procedimento para atualização.

https://h30487.www3.hp.com/t5/Dicas-dos-Experts-para-Servidores/Como-reinstalar-ou-atualizar-o-Intel...