HPE DL20 GEN 10

[DL20]

Tenho um HP Proliant DL20 g10, estou instalando o unbutu server 16.04.02 configurado em RAID1 com 2 HD de 1TB, porém quando faço a instalação do S.O não aparece a junção dos HD, aparece os  dois. Já desabilitei o raid, ativei  suporte SATA AHCI . O que devo fazer para instalar o S.O em Raid 1? 

Grato,

[FabioC · Accepted solution]

Bom dia !! 

Conforme a expecificação da controladora smart array S100i , ela suporta Raid somente para instalar o Widows.

https://h20195.www2.hpe.com/v2/getdocument.aspx?docname=a00053820enw

Storage Controllers
The Gen10 controller naming framework has been updated to simplify identification as depicted below. For a more detailed breakout
of the available Gen10 Smart Array controllers visit the HPE Smart Array Gen10 Controllers Data Sheet
Software RAID
HPE Smart Array S100i SR Gen10 SW RAID
Notes:
− HPE Smart Array S100i SR Gen10 SW RAID will operate in UEFI mode only. For legacy support an additional controller will
be needed, and for CTO orders please also select the Legacy mode settings part, 758959-B22.
− HPE Smart Array S100i SR Gen10 SW RAID is off by default and must be enabled by selecting 784308-B21.
− The S100i is a 14-port SATA controller, but only 12 ports are accessible as 2 are leveraged to support the 2 M.2 options on
the Primary Riser.
− The S100i supports windows only.