Migração Raid1 para Raid5

[Ricardo_G]

amigo a imagem esta pequena

oque diz?

[WSilva2017]

Não foi encontrado um arquivo de definição de pacote. O arquivo não é um pacote válido.

[Ricardo_G]

tente instalar esse http://h20566.www2.hpe.com/hpsc/swd/public/detail?sp4ts.oid=5195931&swItemId=MTX_ebacd285e9d347549d0...

[WSilva2017]

ok, vou ja baixar e tentar.

Cumprimentos

WSilva

[WSilva2017]

Bom dia,

Julgo que tem os controladores envio-lhe abaixo dos detalhes que encotrei quando instalei o smart storage, e qual o outro passo a seguir ainda não instalai o disco na maquina.

Controller Hardware Information

Controller Smart Array P420i
Slot 0
PCI Address (Domain:Bus:Device.Function) 0000:03:00.0
Hardware Revision B
Controller Serial Number 001438021856EE0
Firmware Version 7.02
Number of Ports 2 (Internal only)
Controller Memory Module Size 512 MiB
Battery/Capacitor Pack Count 1

Controller Settings

Transformation Priority Medium
Rebuild Priority Low
Surface Scan Analysis Priority Idle
Surface Scan Delay 15 sec
Parallel Surface Scan Supported No
Physical Drive Write Cache State Disabled
Spare Activation Mode Activate on Physical Drive Failure (default)

Advanced Controller Settings

RAID 5/6/50/60 Degraded Mode Performance Optimization Disabled
Physical Drive Request Elevator Sort Enabled
RAID 6/60 Alternate Inconsistency Repair Policy Disabled
Maximum Drive Request Queue Depth Automatic
Monitor and Performance Analysis Delay 60 min

Controller Configuration Summary

Arrays 1
SmartCache Arrays 0
Logical Drives 1
Data Logical Drives 1
SmartCache for Logical Drives 0
Physical Drives 2
Data Drives 2
SmartCache Drives 0
Spare Drives 0
Drives in HBA Mode 0
Unassigned Drives 0
Primary Boot Logical Drive/Volume None
Secondary Boot Logical Drive/Volume None

Port Settings

Port 1I
Port Location Internal
Port 2I
Port Location Internal

Controller Status

Temperature Sensors

Controller Temperature 61°C
Cache Module Temperature 31°C
Capacitor Temperature 28°C

Storage Enclosures

Internal Drive Cage

Internal Drive Cage

[Ricardo_G · Accepted solution]

isso mesmo, possui a memoria e a bateria, quando adicionar o novo disco, voce pode migrar online.

Abra o smart storage administrator - selecione o volume logico e migrar .